Kegging & Dispense

Suitable for 35L and 65L BrewZillas Gen 4's and 65L DigiBoils. The feet of those brewing systems slot into the grooved on the dolly plate to make moving your brewery around a breeze. Lock your brewery in place with two locking wheels.Unfortunately due to...

This jacket suits the 32L Stainless Steel Conical Fermenters made by KegLand that we sell.These fit quite well but are a little tight and in places and can easily tear a little at the corners. You can see this in the photos on the handle and...

For use with our 32L Stainless Steel Conical Fermenters. Allows circulation of coolant. Ports on lid are 1/2" BSP so will take a lot of widely available fittings (camlocks/ barbs/ john guests).  Your unit will come with less fingerprints than the one in the Kegland...

This bucket fermenter is made with PP and comes with airlock, temp sticker and tap.Capacity of this bucket is 30L, height is 42cm and dimeter is 37.5cm.Capacity indicator for better measurement is stamped on the outside of the container.If you are looking for an...

We currently have black check valves - they work the same as the one in the picture.A third of the price of the john guest equivalent and does the same job.3/8" push fit both ends. Just cut your gas line and put this inline...

This monotight push fit fitting is 3/8"Female to Female. The bulkhead with locknut is designed to go through the wall of a tank, housing or wall or panel. Simply fit to wall/panel/vessel and push tube in from both sides to join.These high quality acetal...

Rated at 93 psi / 6.4 bar 9 Food Grade PET plastic, re-useable bottles with screw caps. Easy to use. A great alternative to traditional glass bottles as there is no need for a capping tool. Lighter than glass so easier and safer to...

KL05104Straight Barbtail Stainless Steel (to be used with 5/8 hex nut) so as to fit it to either a coupler or tap shankStraight Barbtail (to be used with 5/8 hex nut) This size barb is ideally suited to tubing/hose that is 6-8mm ID.Note:- Needs...

Specifications:0-40psi Rubber Coated8mm / 5/16" Push in BarbThis is direct replacement for the 0-15PSI gauge that comes with the V1 Blowtie Kit.The barb on this gauge will enable you to put this directly onto hosing or alternatively you can connect it to any of the...

Specifications:0-15psi / 0-100kPa / 0-1.0 Bar (kg/cm^2)Rubber Coated8mm duotight compatible Push in BarbThis triple scale gauge is the ideal range to read pressures for pressurised fermentation. The triple scale gauge gives readings in Bar, PSI and kPA so irrespective of what units you prefer...

This manifold bracket comes fitted with check valves per ball valve outlet. Each check can also be removed if you want gas or water to move freely in all directions. If you want to cap off certain lines, we would recommend using an 8mm (5/16')...

This manifold bracket comes fitted with check valves per ball valve outlet. Each check can also be removed if you want gas or water to move freely in all directions. If you want to cap off certain lines, we would recommend using an 8mm (5/16')...

This manifold bracket comes fitted with checkvalves per ball valve outlet. Each check can also be removed if you want gas or water to move freely in all directions. If you want to cap off certain lines, we would recommend using an 8mm (5/16') PlugUsing...

Currently comes with FREE PCO38 Gen2 Black Elbow Cap Insert!Available as 2 options: 1x Keg plus the PCO38 Tapping head (includes everything shown in the photo)  2x Keg plus the PCO38 Tapping head (only 1 head) (includes everything shown in the second photo)  This...

NOTE - the kegs have black lids (not red as pictured)The kegs are shipped in plastic shipping bags (due to size and light weight). Any dents in the kegs when they arrive will push out under pressure. Please contact us if you think your...

Keep your beer colder for longer with the Oxebar Neoprene Jacket / Parka.Made with a rigid internal bump cap (which forms the base of the jacket) to avoid the dragging scratches. Also keeps the keg more stable when pouring (as it gives wider base).This...

Octo-Tap TT Bar - Brushed Stainless Steel Font OnlyThese 8 Tap TT Bar Fonts do not have any insulation foam. If you do want to insulate, you could either use expanded foam if you're a more permanent operator. Or a trimmed pool noodle. The...

Learning to use a round pizza peel and developing your turning skills in the oven is most beneficial and recommended. It will take a bit of practice to use the round turning peel but with some time it will be worth it. Round turning...

 KL05098Straight Barbtail Stainless Steel (to be used with 5/8 hex nut) so as to fit it to either a coupler or tap shankStraight Barbtail (to be used with 5/8 hex nut) This size barb is ideally suited to tubing/hose that is 4-6mm ID. Note:- Needs...

KL05081Angle Barbtail Stainless Steel (to be used with 5/8 hex nut) so as to fit it to either a coupler or tap shankAngle Barbtail (to be used with 5/8 hex nut)This size barb is ideally suited to tubing/hose that is 4-6mm ID.Note:- Needs to be...